How to Make a Cell Phone Scenario



Cell phones come in quite a few designs and measurements, and discovering a situation to fit your phone can from time to time be tough and highly-priced. Fortunately, making a personalized cell cell phone case is much easier than you would believe. You can very easily make a case at household utilizing a sizzling glue gun or some silicone and cornstarch. You can also make a very simple slip protect out of felt. If you now have a plastic case, then why not&nbspdecorate it&nbspto make it stand out?



&nbsp

&nbsp

&nbsp





Systemone


Making a Hot Glue Cell Telephone Case





  1. Tape a template to the again of your cell phone, if preferred.&nbspMaking a sleek scenario is tough with scorching glue, so most people today opt for to do designs, such as swirls or mandalas. Mobile Covers can absolutely free-hand the sample, or you can trace it. If you want to trace it, do the next:




    • Trace your mobile phone on to a sheet of paper.

    • Draw your sample working with a black marker. Make positive the design touches the sides.

    • Cut out the template alongside the outline.

    • Tape the template to the again of your cell phone.



    &nbsp

    &nbsp

    &nbsp




  2. Wrap your cellphone like a present with parchment paper.&nbspCut a sheet of parchment paper that is about twice the measurement of your telephone. Area your cell phone on top, with the monitor going through up. Wrap the paper over the side edges of your cellular phone, then safe them with a piece of tape. Wrap the leading and bottom edges, and protected them with tape as effectively.




    • Wrap your mobile phone as tightly as you can.

    • Make sure that the cell phone is turned off 1st to prevent overheating.

    • Make positive that you are taping every little thing on the&nbspentrance&nbspof the phone.



    &nbsp

    &nbsp




  3. Mark off the camera, sockets, and buttons with a pen or coloured pencil.&nbspThese will be your rules so that you don’t accidentally go over them with hot glue.




    • Make confident that the color you use shows up versus your mobile phone.



    &nbsp

    &nbsp




  4. Define the sockets, buttons, and camera.&nbspThis also contains the speaker and mic holes as effectively. If you include them up, you don’t be able to use your mobile phone properly.


    &nbsp

    &nbsp




  5. Fill in the aspect edges.&nbspMake absolutely sure that you make them awesome and thick. Also, make absolutely sure that you steer clear of the buttons and sockets.


    &nbsp

    &nbsp




  6. Fill in the back again.&nbspAgain, incredibly hot glue is not the best medium to make a perfectly clean circumstance, so your very best guess is to make a texture of sample. Whichever you pick out, make guaranteed that all the traces hook up to the sides of the mobile phone as nicely as to just about every other.


    &nbsp

    &nbsp




  7. Outline the entrance.&nbspYou can merely attract a skinny line close to the front of the cellphone, appropriate next to the side edge. You can also make a series of very small dots as an alternative. This will give your circumstance a lip and enable it keep on your cellphone.


    &nbsp

    &nbsp




  8. Eliminate the case and the parchment paper.&nbspOnce the glue has hardened, peel it off of your cellphone. Eliminate the parchment paper from the cellular phone upcoming. At this point, it would be a excellent notion to take a look at the circumstance on the cellular phone. If there is any glue covering a button, socket, etc., then you can lower it absent with a craft blade.


    &nbsp

    &nbsp




  9. Paint the case, if preferred.&nbspOnce you are delighted with the circumstance, choose it off of the cell phone. Paint the exterior with nail polish, then allow the polish dry.&nbspIf you want the circumstance to be a reliable shade, you can use spray paint as a substitute.


    &nbsp

    &nbsp



&nbsp


&nbsp




System2


Making a Silicone Mobile Cell phone Case





  1. Place on plastic gloves and defend your work floor.&nbspCover your counter with plastic wrap, parchment paper, or wax paper. You can also function on best of a marble counter or a glass sheet as an alternative.




    • Try out to operate in a perfectly-ventilated region. Silicone can have a strong odor.

    • The silicone used in this system is&nbspnot&nbspthe identical as sizzling glue.



    &nbsp

    &nbsp




  2. Measure out your cornstarch and distinct silicone.&nbspPour some cornstarch onto a sleek counter or into a glass bowl, then squeeze some crystal clear silicone onto it. The measurements will not have to be precise you just want to have much more cornstarch than silicone. Strategy on working with about 5 tablespoons (50 grams) of cornstarch and 2 to 3 tablespoons (30 to 40 grams) of silicone.




    • Make certain that you are using obvious silicone. You can discover it in dwelling improvement shops. It will come in a syringe.

    • If you won’t be able to come across cornstarch, glimpse for cornflour. You can also use potato starch as an alternative.



    &nbsp

    &nbsp




  3. Consider incorporating some coloration.&nbspYou don’t have to do this, but it a great way to make your cell phone circumstance appear more appealing. If you really don’t do this, your phone circumstance will glance white. You use a number of drops of liquid dye, liquid watercolor, meals coloring, or acrylic paint.


    &nbsp

    &nbsp




  4. Knead almost everything collectively right up until the silicone turns to dough.&nbspYou will need to knead it about 20 situations or so. You is not going to decide on up all of the cornstarch, which is ordinary. The dough could seem crumbly at initial–just retain kneading!


    &nbsp

    &nbsp




  5. Roll the dough into a flat sheet.&nbspYou can do this with a rolling pin, a glass, a wine bottle, or even a spray paint can. Continue to keep rolling right up until you have a sheet a little much larger than your telephone. It should really be about ⅛ inch (.32 centimeter) thick.


    &nbsp

    &nbsp




  6. Place your cellular phone on top of the sheet.&nbspMake absolutely sure that your display screen is dealing with upwards, and you have equal amounts (or close to it) of dough sticking out more than each aspect.


    &nbsp

    &nbsp




  7. Wrap the dough more than the sides and prime of your cellular phone.&nbspSlide a paint spatula underneath the dough, then elevate it up and fold the dough about the sides of the telephone. Easy out any creases or wrinkles try out to be as neat as achievable.


    &nbsp

    &nbsp




  8. Use stamps to indent designs, if desired.&nbspFlip your phone above and dust it with cornstarch. Use a stamp to indent styles into it. You can also use cardboard cutouts instead to create your own, one of a kind designs. Raise the stamp absent when you are completed.




    • If you want to make a quilted style and design, allow the silicone harden for about ten to twenty minutes, then dust it with cornstarch. Use a knife to make cross-crossing diagonal traces in a diamond/quilted pattern.



    &nbsp

    &nbsp





  9. Enable the silicone dry in advance of taking away it.&nbspHow very long this normally takes is dependent on the kind of silicone you applied and the weather ailment. It may well acquire just two hrs, or it might just take 24 hours. Once it is dry and stable to the touch (you cannot dent it), pull it off of your cellular phone.




    • If the scenario is dusty within, wipe it down with a damp fabric.



    &nbsp

    &nbsp




  10. Trim the excess silicone away from the entrance.&nbspCut it about seven millimeters away from the facet edges, and one centimeter absent from the top and bottom edges.Alternatively, you can slash alongside the indentations brought on by the seam in between the phone’s monitor and case.


    &nbsp

    &nbsp




  11. Minimize out any indentations.&nbspIf you were being to seem within your mobile telephone scenario, you’d see tiny indents caused by the digicam, flash, buttons, and sockets. Minimize all of these out working with a sharp craft blade.




    • You can also carve a rectangle or trapezoid into the best and/or base edge for the speaker as a substitute of cutting out a slot.



    &nbsp

    &nbsp




  12. Sand the situation smooth, if desired.&nbspYou can utilize additional uncooked silicone on prime if you want to, then easy it out with a paint spatula or popsicle stick.


    &nbsp

    &nbsp




  13. Paint the stamped areas with nail polish, if ideal.&nbspChoose a color that goes nicely with your scenario. Metallic shades, these kinds of as silver, do the job especially properly!




    • You can make far more shapes out of silicone independently, enable them dry, paint them with nail polish, then glue them to the scenario with a drop of clear silicone.



    &nbsp

    &nbsp



&nbsp


&nbsp




System3


Making a Felt Cell Cellular phone Case





  1. Reduce a piece of felt in half widthwise.&nbspIf you want a thicker cellular phone circumstance, use two pieces of felt as a substitute. They can be the exact coloration or contrasting colors.


    &nbsp

    &nbsp




  2. Lower the items &frac12 inch (one centimeter) larger than your cellular phone.&nbspPlace your phone on prime of the initial piece of felt. Trace all around it employing a &frac12-inch (1-centimeter) border. Slice the felt out, then use it as a template for the other piece(s).


    &nbsp

    &nbsp




  3. Location your cell phone among the two items of felt.&nbspMake certain that all of the edges and corners are aligned. If you are producing a lined circumstance, with two different shades of felt, select a single coloration to be on the inside of, and the other color to be on the exterior.


    &nbsp

    &nbsp




  4. Pin the parts of felt all around your cellphone.&nbspYou only have to have to pin the bottom and two side edges depart the top edge open up. Attempt to pin the felt as tightly around your mobile phone as you can. The in good shape will be cosy at to start with, but it will at some point loosen up.


    &nbsp

    &nbsp




  5. Get rid of your cellphone and sew alongside the pinned edges.&nbspUse the pins as a guide as you sew. Your seam allowance will fluctuate, dependent on the thickness of your phone. You can do this on a stitching machine or by hand.




    • If you are doing this by hand, think about applying embroidery floss in a contrasting color.

    • If you are doing this on a stitching device, backstitch at the start off and finish of your stitching.



    &nbsp

    &nbsp




  6. Trim down your seam allowances.&nbspTry to reduce as near as you can to the stitching, about ⅛-inch (.three centimeters).&nbspFor a far more exclusive look, use pinking shears as a substitute.


    &nbsp

    &nbsp



&nbsp


&nbsp



Leave a Comment

Your email address will not be published. Required fields are marked *